Dental Bleach
Description
Before buying please read what post-processing is required due your device.
Dental Bleach is a resin with PMMA-type ceramic micro filling, made of biocompatible raw materials. It has high durability and high tensile strength, resistant to mechanical and chemical effects. Recommended for printing models of temporary crowns and bridges. The slight odor and lack of hazardous monomers allow for using it even in a small room.
Characteristics
- Bleach Color
- 8.5 ± 2.5% Elongation at break
- 84.5 ± 3.5 Hardness Shore D
- Weak Odor
- <0,5% Shrinkage
- 135.0 ± 5.0 MPa Bending strength
- 2250 ± 150 MPa Elastic modulus
- 1100 ± 300 mPa·s Viscosity according to Brookfield
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Unique mechanical properties
Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Stable color
Depending on postcuring condition. Bleach color is achievable. It is stable for a long time even in aggressive media
Printers
Photos
